Model information
Description
A simple holder for small brush DC motor class 130. The motor is secured in the holder with an M3-18 screw. There are 4 holes for M3 screws in the front to attach the holder.
Other components: screw M3-18
Printing parameters:
Nozzle: 0,4 mm
Layer height: 0,2 mm
Perimeters: 2
Infill: 15%
Supports: None
The author lists PLA as the filament used.
Original text by the author on Printables
<p>Simple holder for small brush dc motor class 130. The motor is secured in the holder with an M3-18 screw. There are 4 holes for M3 screws in the front to attach the holder.</p><figure class="image image_resized" style="width:54.21%;"><img src="https://media.printables.com/media/prints/1268087/rich_content/3712b266-56b5-4c00-a4b1-236937a98476/holder.png#%7B%22uuid%22%3A%22ebd7044f-0029-440a-915b-b5a7df5a9939%22%2C%22w%22%3A1012%2C%22h%22%3A758%7D"></figure><p> </p><p>Other components:</p><ul><li>screw M3-18</li></ul><p> </p><p>Printing parameter:</p><ul><li>Nozzle: 0,4 mm</li><li>Layer height: 0,2 mm</li><li>Perimeters: 2</li><li>Infill: 15%</li><li>Supports: None</li><li>Filament: PLA</li></ul>
There are no comments yet. Verified ratings and makes appear separately below.