Model information
Description
Purpose
This model is an adaptation designed to allow the use of DC motors instead of stepper motors in the original design.
Practical Uses
The author reports using two 6Vdc, 105 rpm micromotors with metal reducers and a lateral axis. A small recess must be made in the robot's foot supports to accommodate placement.
Included Parts
- soporte_motor_1.0.stl
- tapa_motor.stl
- rueda.stl
Printing Guidance
Settings used by the author include a 0.2 mm resolution and 100% infill. No rafts or supports were used.
Attribution: DC Motor Adapter For R2D2
Original text by the author on Printables
<p>This piece is an adaptation to be able to use dc motors, instead of motors step by step like the original design. I have used two micromotors with metal reducer of 6Vdc and 105 rpm, with lateral axis.</p>
<p>I have to say that for its placement we must make a small recess in the supports of the feet of the robot.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong> <div><p>Prusa Clone</p></div>Rafts:
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div>Resolution:
<p>0.2 mm</p>
<p class="detail-setting infill"><strong>Infill: </strong> <div><p>100%</p></div>
</p></p></p>
Category: Model Robots
Questions and contributions