Model information
Description
An adaptation to use DC motors instead of stepper motors like the original design. The author reports using two 6Vdc, 105 rpm micromotors with metal reducers and a lateral axis. The author notes that a small recess must be made in the robot's foot supports for placement.
Print Settings:
Printer Brand: Prusa
Printer: Prusa Clone
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 100%
Original text by the author on Printables
<p>This piece is an adaptation to be able to use dc motors, instead of motors step by step like the original design. I have used two micromotors with metal reducer of 6Vdc and 105 rpm, with lateral axis.</p>
<p>I have to say that for its placement we must make a small recess in the supports of the feet of the robot.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong> <div><p>Prusa Clone</p></div>Rafts:
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div>Resolution:
<p>0.2 mm</p>
<p class="detail-setting infill"><strong>Infill: </strong> <div><p>100%</p></div>
</p></p></p>
Category: Model Robots
There are no comments yet. Verified ratings and makes appear separately below.