MESHOPIAModel sheet · for your workshop
Creality Parts & Upgrades
Creality CR-10 SE Cam Holder
Authorship, licence & source
- Original author
- DAKUE1999
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/644826
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Creality CR-10 SE Cam Holder
Purpose
This model is designed to serve as a cam holder specifically for the Creality CR-10 SE printer.
Practical Uses
It is used to hold a camera component in place on the printer hardware. The author notes that the fit is intentionally very tight, requiring a bit of force to push the holder into position.
Included Parts
- CR-10 SE CamHolder.stl
Printing and Assembly Guidance
When assembling, be prepared to apply force to push the holder in, as the fit is designed to be very tight.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.