MESHOPIAModel sheet · for your workshop
RC & Mechanics
Roof skid for Hobby Plus CR18P Evo Pro
Authorship, licence & source
- Original author
- Garrett R
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL
- Declared source
- Printables
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Skid designed to be placed on the roof of the Hobby Plus CR18P Evo Pro. It is a specific body accessory intended for the upper area of the crawler. The source does not detail the fastening method nor certify structural protection or rollover resistance; its nominal compatibility does not replace verification with the actual body.
Preparation, compatibility, and printing
Place the model on the roof and check supports, holes, and clearances before printing the final version. Pay attention to thin areas that could be damaged when removing supports. No material, layer, or infill are documented. Choose the finish and orientation according to the geometry, without altering the mounting points to fit them by pressure.
Manufacturing & assembly notes
Place the model on the roof and check supports, holes, and clearances before printing the final version. Pay attention to thin areas that could be damaged when removing supports. No material, layer, or infill are documented. Choose the finish and orientation according to the geometry, without altering the mounting points to fit them by pressure.
Declared changes from the original
Imported CC0 model with an automated editorial listing; the generated photographic cover is pending.