Información del modelo
Descripción
CR Touch shim
Purpose
This single shim is designed to provide clearance for wiring and the plug end when the CR Touch is installed using its included bracket. According to the author, this part is required on the Ender 3 V2 when utilizing a Spider V1.0 hotend.
Practical Uses
It serves as a spacer to ensure proper fitment and wire management during the assembly of the CR Touch probe on specific hotend configurations.
Included Parts
- 1 piece shim (CR Touch spacer.stl)
Printing and Assembly Guidance
The author reports printing the part with PLA, though they note there is no reason to believe the model would pose a problem with other materials. The author reports the part has been in use for 12+ hours of print time with no indications of pending failure.
Texto original del autor en Printables
<p>1 piece shim, will clear wiring and plug end when installed on bracket included w/CR touch. Required on Ender3 V2 when using Spider V1.0 hotend.</p><p>Printed w/PLA, no reason to believe the model would pose a problem with other materials.</p><p>Part in use for 12+ hours of print time, no indications of pending failure.</p>
Preguntas y aportaciones