MESHOPIAModel sheet · for your workshop
Creality Parts & Upgrades
CR Touch adapter for Sprite Extruder 2.0
Authorship, licence & source
- Original author
- Reuben
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1320217
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
CR touch adapter for sprit extruder 2.0
Purpose
This model is a revised version of a previous design intended to fix the Z offset by -3mm to compensate for the sensor placement.
Practical Uses
It is designed to serve as an adapter for a CR Touch sensor when used with a Sprite Extruder 2.0.
Included Parts
The model includes the CR touch - V2.stl file. This model requires additional hardware: two M3 bolts and two M3 nuts.
Printing and Assembly Guidance
Recommended print settings are a speed of 30mm/s, a 0.12mm layer height, 50% infill, and 3 to 5 walls. The author notes that while they printed in PLA, using ABS or ASA would increase strength. If tolerances are not sufficient, it is suggested to print at 105% scale.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.