MESHOPIAModel sheet · for your workshop
Other Printer Parts & Upgrades
CR-6 Max Cable Swing Arm
Authorship, licence & source
- Original author
- Ryan
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/155732
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
CR-6 Max Cable Swing Arm
Purpose
This design provides a cable management solution for a direct drive CR-6 Max. It is designed to mount to the location previously occupied by the factory extruder motor.
Practical Uses
To prevent interference with the swing motion of the arm, the author notes that only the two back holes should be used for mounting. The holes in the mount will require drilling to accommodate a preferred fastener size.
Included Parts
- Extruder Mount.stl
- Swing Arm.stl
Note: The assembly requires a standard skateboard bearing to be pressed into the swing arm to push on the stud.
Printing and Assembly Guidance
Assembly begins by bolting the mount plate onto the machine first. For printing, the author used PLA with a 0.6mm nozzle and 3 walls, though they note that other filaments and settings should work.
Attribution: Designed by the original author.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.