MESHOPIAModel sheet · for your workshop
Creality Parts & Upgrades
CR-5 Pro H Heat sink fan duct
Authorship, licence & source
- Original author
- nieckel
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/603420
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose
This model is designed to replace the original heat sink fan duct to address clogging issues caused by insufficient cooling. The design features unique ventilation intended to increase the printer's filament volumetric capacity by up to 25%.
Practical Uses
This modification is intended for use on the CR-5 Pro H. It is designed to be installed without the use of screws or permanent fixing, though the original metal protection must be removed to use this part.
Included Parts
- CR-5 Pro H Hotend Fan Duct.3mf
Printing Guidance
The author recommends printing in PET-G, ABS, ASA, PP, or NYLON; PLA is not recommended. No supports are required for printing.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.