Model information
Description
CR-10 SE Nozzle Wiper
Purpose
This model is designed to function as a nozzle wiper for the CR-10 SE. The creator notes that the design may still require minor adjustments or tweaking.
Practical Uses
To implement this wiper, the user must utilize the existing bolt holes on the printer, which requires the use of longer screws than the stock hardware. The design utilizes the head of a small brass parts cleaner brush as the wiping component. To ensure proper positioning, the user should configure the G-code to wipe 5 mm before the end of the sequence, which places the nozzle directly at the bristles.
Included Parts
- Nozzle Wipe.3mf
Printing and Assembly Guidance
Assembly requires a small brass parts cleaner brush head and longer screws to accommodate the existing bolt holes. For functional placement, the G-code must be modified to include a 5 mm wipe before the end of the command to align the nozzle with the bristles.
Original text by the author on Printables
<p>-Uses existing bolt holes just need longer screws</p><p>-I used the head off a small brass parts cleaner brush</p><p>-I set the gcode to wipe 5 mm before its end which gets the nozzle right at the bristles</p><p> </p>
Questions and contributions