Información del modelo
Descripción
CR-10 Legs
Purpose
These legs are designed for a CR-10 or any other 4020 extrusion base. They serve as a support structure for the printer frame.
Practical Uses
The model includes 4020 extrusion legs as the primary component. Additionally, the author includes 2020 extrusion legs intended for providing extra support at the front and back of the base. This assembly requires no screws. During installation, users must rearrange wires and attach the bed wire to prevent it from getting stuck on the back corner.
Included Parts
- 4020 Legs
- 2020 Legs
Printing and Assembly Guidance
When importing objects into the slicer, they must be oriented upright. The author used an Elegoo Neptune 4 max with Orca Slicer using the following settings:
- Layer Height: 0.24 mm
- Walls/Perimeters: 2
- Make overhangs Printable: On
- Infill density: 10%
- Infill pattern: Cubic
- All other settings were standard.
Texto original del autor en Printables
<p>Here are some Legs for a CR-10 or any other 4020 extrusion base. I have included legs for 2020 extrusion if you want the extra support for the front and back. There are no screws needed!</p><p>You will need to rearrange the wires and attach the bed wire to keep it from getting stuck on the back corner. </p><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/1028074/rich_content/4fefca73-0e41-436b-b493-0aa0afa4409d/img_6269.jpg#%7B%22uuid%22%3A%223728af77-2b9a-4926-b6fa-4f55e44e7934%22%2C%22w%22%3A1364%2C%22h%22%3A2425%7D"></figure><p> </p><p>I printed mine on an Elegoo Neptune 4 max and sliced it with Orca Slicer with the following settings.</p><p>Layer Height: 0.24 mm</p><p>Walls/Perimeters: 2</p><p>Make overhangs Printable: On</p><p>Infill density: 10%</p><p>Infill pattern: Cubic</p><p>All other settings were standard.</p><p>When you import the objects into your slicer you will need to orient them upright.</p><p> </p>
Preguntas y aportaciones