Model information
Description
Legs for a CR-10 or any other 4020 extrusion base. The author includes legs for 2020 extrusion for extra support for the front and back. No screws are needed. The author notes that wires will need to be rearranged and the bed wire attached to prevent it from getting stuck on the back corner.
Printing instructions provided by the author:
- Printer used: Elegoo Neptune 4 max
- Slicer: Orca Slicer
- Layer Height: 0.24 mm
- Walls/Perimeters: 2
- Make overhangs Printable: On
- Infill density: 10%
- Infill pattern: Cubic
- All other settings were standard.
- When importing objects into the slicer, they must be oriented upright.
Original text by the author on Printables
<p>Here are some Legs for a CR-10 or any other 4020 extrusion base. I have included legs for 2020 extrusion if you want the extra support for the front and back. There are no screws needed!</p><p>You will need to rearrange the wires and attach the bed wire to keep it from getting stuck on the back corner. </p><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/1028074/rich_content/4fefca73-0e41-436b-b493-0aa0afa4409d/img_6269.jpg#%7B%22uuid%22%3A%223728af77-2b9a-4926-b6fa-4f55e44e7934%22%2C%22w%22%3A1364%2C%22h%22%3A2425%7D"></figure><p> </p><p>I printed mine on an Elegoo Neptune 4 max and sliced it with Orca Slicer with the following settings.</p><p>Layer Height: 0.24 mm</p><p>Walls/Perimeters: 2</p><p>Make overhangs Printable: On</p><p>Infill density: 10%</p><p>Infill pattern: Cubic</p><p>All other settings were standard.</p><p>When you import the objects into your slicer you will need to orient them upright.</p><p> </p>
There are no comments yet. Verified ratings and makes appear separately below.