MESHOPIAModel sheet · for your workshop
RC & Robotics
Carbon Hornet II
Authorship, licence & source
- Original author
- Herastos
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 5 files · STL · STEP
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1542382
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
This model is a remake of the Carbon Hornet II, a 5" drone originally designed and produced by S.Creamer in 2016. This version has been remodeled to be easily printable while preserving the original design.
Purpose and Practical Uses
The frame is intended for use with 2207 motors. It features mounting holes compatible with 30x30, 25x25, and 20x20 flight controllers. The video mount is currently designed for Caddx cameras with a 6mm screw mounting distance. While no specific location is designated for antennas or radio receivers, the author notes there is ample space available inside the frame. The battery can be secured under the length of the rear arm using a 20mm wide strap via provided slots, or alternatively secured to the top of the frame using two straps.
Included Parts
- Carbon_Hornet_Frame.stl
- Carbon_Hornet_Bras_arrière.stl
- Carbon_Hornet_Bras_avant.stl
- Carbon_Hornet_Support_Vidéo_Walksnail.stl
- Carbon_Hornet_II_V1.step
Printing and Assembly Guidance
The author recommends printing the frame and arms using a strong material such as PA12-CF, PA6-CF, or PETG-CF. For optimal strength, use 5 perimeter walls and at least 50% infill (100% is ideal).
Required hardware includes:
- 2x M3 x 19 standoffs
- 6x M3 nuts
- 6x M3 x 12 screws
- 2x M3 x 6 screws
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.