Model information
Description
A remix for the CR-6se of the adapter plate used on the CR-10. It fits as close as possible to the connector clip without making changes or deletions. The holes for the printed Cable Guide are the same as on the CR-10, however the guide is too tall for the flat cable. Using this plate, the rest of the installation is the same. The author added files for the cable guide; the notch is for the head of the Zip tie so it captures the ribbon. The author reports all parts were printed using ProtoPasta Carbon Fiber HTPLA at 220c.
Original text by the author on Printables
<p>This is a re-mix for the CR-6se of the adapter plate used on the CR-10, it fits as close as possible to the connector clip without making changes or deletions.<br>The holes for the printed Cable Guide are the same as on the CR-10, however the guide is too tall for the flat cable. I'll do a re-mix for mine and post it when I'm done. <br>Using this plate, the rest of the installation is the same. Very straightforward and elegant design. Thank you!<br><br>Edit: 9/4/22 Added the files for the cable guide. The notch is for the head of the Zip tie so it captures the ribbon. Enjoy!</p><p>All the parts were printed using the ProtoPasta Carbon Fiber HTPLA at 220c. </p>
There are no comments yet. Verified ratings and makes appear separately below.