MESHOPIAModel sheet · for your workshop
Outdoor Toys
Boat
Authorship, licence & source
- Original author
- AZ 3D Makers
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1270164
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
This model is a boat project designed for RC enthusiasts. It is intended for use in calm water environments such as lakes, ponds, and rivers, offering an engaging DIY project for hobbyists.
Included in the files is boat.stl.
Printing guidance for PLA material is as follows:
Use a layer height of 0.2 mm with 2 wall line counts and 4 top/bottom layers. The infill density should be set to 100%. The printing temperature is 200°C with a build plate temperature of 60°C.
For optimal quality, maintain a print speed between 50 and 150 mm/s. The travel speed should be 120 mm/s, and the retraction speed should be 25 mm/s. Set the cooling fan to 100% after the first few layers. A brim is recommended for adhesion.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.