Model information
Description
BC-250 Heat sink mount
Purpose
This model is a custom heat sink mount designed for the BC-250. It is intended to facilitate the installation of a specific aftermarket heat sink on the device.
Practical Uses
Users can utilize this mount to adapt a compatible heat sink to the BC-250. The design is intended to work in conjunction with an Intel clip bracket and various hardware components.
Included Parts
This listing includes the digital file: bc-250 - mk7.stl. Note that physical hardware, such as the Intel clip bracket, M4 bolts, M4 nuts, or the heat sink itself, are not included.
Assembly Guidance
The author reports using an Intel clip bracket and hardware from the stock heat sink for assembly. The mounting holes are sized to accommodate two different fastening methods: using M4 bolts to self-tap from the bottom, or using screws through the holes secured with M4 nuts on the top.
Original text by the author on Printables
<p>I made a heat sink mount of the BC-250 it uses this heat sink <a href="https://www.amazon.com/dp/B0CLLJPXVN?ref=ppx_yo2ov_dt_b_fe">https://www.amazon.com/dp/B0CLLJPXVN?ref=ppx_yo2ov_dt_b_fe</a></p><p> </p><p>I used the intel clip bracket and some of the hardware included as well as left over hardware from removing the stock heat sink</p><p> </p><p>The holes are sized so you can either use m4 bolts and self tap from the bottom or screw them through and use m4 nuts on the top</p>
Questions and contributions