A heat sink mount for the BC-250. The author reports using an Intel clip bracket and hardware (including hardware from removing the stock heat sink) for assembly. The holes are sized to allow for either M4 bolts with self-tapping from the bottom or screws through the holes with M4 nuts on the top.
Original text by the author on Printables
<p>I made a heat sink mount of the BC-250 it uses this heat sink <a href="https://www.amazon.com/dp/B0CLLJPXVN?ref=ppx_yo2ov_dt_b_fe">https://www.amazon.com/dp/B0CLLJPXVN?ref=ppx_yo2ov_dt_b_fe</a></p><p> </p><p>I used the intel clip bracket and some of the hardware included as well as left over hardware from removing the stock heat sink</p><p> </p><p>The holes are sized so you can either use m4 bolts and self tap from the bottom or screw them through and use m4 nuts on the top</p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.