Información del modelo
Descripción
Battery bracket with latch for the RC model Beluga HB.
Purpose
This model serves as a replacement battery fastener designed to provide speed and convenience when securing power sources. It is compatible with both the native batteries and the updated 2S (5000mAh) batteries.
Practical Uses
It is intended for use on the Beluga HB RC model to facilitate easier battery swaps and more secure fastening.
Included Parts
- 1x Battery bracket with latch (Крепеж АКБ (белуга) REMIX V2.stl)
Printing and Assembly Guidance
The author recommends printing this part using PETG Carbon at a layer height of 0.2 mm. For assembly, 4 M3*5mm screws are required (not included).
Texto original del autor en Printables
<p>A change for the battery fastener. For native batteries, as well as for the updated 2S (5000mAh)Speed and convenience. You will also need 4 screws M3*5mm Printed on PETG Carbon 0.2 mm</p>
Preguntas y aportaciones