Información del modelo
Descripción
Basic Scx24 Trailer
Purpose
This model is a basic trailer designed specifically for the SCX24. The author created this design to provide a simplified alternative to complex trailer kits that require numerous bearings, bolts, nuts, and multiple files.
Practical Uses
This trailer serves as a lightweight accessory for the SCX24 platform. To attach the hitch to an SCX24 Deadbolt, the author recommends using an open frame hole located behind the rear shock tower. A paper clip or similar item is slid through this hole, and the hitch is then placed onto the middle of the paper clip.
Included Parts
The model consists of the following STL files:
- Axel3.stl
- Bed.stl
- BedToCar.stl
- AxelMountx2.stl
- HitchForScx.stl
- TrailerTire.stl
Assembly Guidance
Assembly requires glue and random screws. To facilitate the hitch attachment on the SCX24 Deadbolt, you may need a tool to make a hole in the plastic frame to allow the paper clip to pass through. Attribution: Author via source text.
Texto original del autor en Printables
<p>I wanted to make a trailer for my scx24 but they all required bearings, bolts nut and like 5000000000000000000000000000000 files, so I decided to make my own, with random screws, paper clips and glue. To put the hitch on the scx24 deadbolt their should be a open frame hole behind the rear shock tower that you slide a paper clip through, in the middle of the paper clip the hitch goes on, see in the pictures. Look closely at the pictures, the quality is very bad but if you look close you can see the details. The only materials you will need are glue, random screws and possibly something to make a hole in the plastic. Oh, and a paper clip or something similar.</p><p><br> </p>
Preguntas y aportaciones