Model information
Description
Purpose
This jack stand and test stand is designed for the Monster GT and other RC cars or trucks. It is intended to hold the vehicle snug and firm off the ground for warming up and tuning purposes.
Practical Uses
The stand provides a stable platform to keep an RC vehicle elevated during maintenance or testing.
Included Parts
MGT STAND TOP (1).stl
MGT STAND BASE.stl
SPLIT-BASE PART 1.stl
SPLIT-BASE PART 2.stl
Printing/Assembly Guidance
The base model does not include cutouts. The author suggests adding cutouts in Cura using 6 bottom layers to create screw pockets for holding small screws while working.
Original text by the author on Printables
<p>A very sturdy jack stand / test stand for my Monster gt, and other rc cars/trucks.</p><p>Holds it very snug and firm off the ground to get it warmed up and tuned. works very well.</p><p>I am not good at cad but learning. </p><p>****The cut outs in the base are not in the model I added them in cura as cutouts with 6 bottom layers to make some screw pockets for placing small screws when working. </p>
Questions and contributions