Aerosleds Ka-30 — Display Model

OVERVIEW
The Aerosleds Ka-30 is a complete model of a snow vehicle featuring a propeller-driven rear engine and a large, elongated fuselage. This model is suitable for creating detailed miniatures for tabletop gaming, dioramas, or specialized hobby displays.

DOWNLOAD CONTENTS
The package includes a variety of source formats including OBJ, MTL, IGS, STEP, and X_T files, along with multiple SLDPRT and SLDASM files. Source originals remain unchanged on disk, while eligible supported resources are retained under English filenames. One JPG image is included as a reference; these images are for visual reference only and are not used for geometry generation.

GEOMETRY AND ASSEMBLY
The model features a streamlined, aerodynamic body with a rounded front and a large fuselage containing windows. It includes a rear-mounted engine supported by connecting struts and a set of skis attached to the underside for snow travel. The geometry is provided as a single surface mesh with no confirmed modularity or detachable components.

PRINTING ADVICE — UNTESTED
Due to the elongated fuselage and the thin support struts connecting the rear engine to the main body, careful support placement is necessary to ensure structural integrity. The underside of the vehicle features skis which may require additional supports depending on your printer's capabilities. For resin printing, a layer height of 0.03mm to 0.05mm is suggested to capture the smooth curves of the aerodynamic body. For FDM printing, a layer height of 0.12mm to 0.20mm is recommended. Consider using high-quality materials to maintain the definition of the window outlines and the mechanical details of the rear propeller assembly.

DIMENSIONS AND SCALE
The model's dimensions are provided in coordinate units rather than verified metric or imperial measurements. No specific real-world scale is confirmed. Users should scale the model according to their specific project requirements or intended display size during the preparation phase.

FINISHING AND DISPLAY
Careful removal of support structures around the strut connections and the underside of the skis is required to maintain the original geometry. Surface preparation should focus on smoothing the transition points between the engine and the fuselage. The model is well-suited for a detailed paint scheme to highlight the contrast between the body and the mechanical rear components.

MEASURED COORDINATE BOUNDS
2960 × 6452 × 3450 coordinate units across world X, Y and Z. Units and native scale are unverified. Suggested display size: 150–250 mm along the chosen main axis, subject to detail thickness and build volume. After confirming slicer units, use target length ÷ current length × 100%. For a documented native 1:N scale and target 1:T, use N ÷ T × 100%. Recheck thin features, joints and supports after resizing.

Colour presentation correction: direct Blender render. Native source body colours, dark mechanical details and original material assignments restored. Original source geometry and earlier download files retained. No physical print certification.