MESHOPIAModel sheet · for your workshop
RC & Robotics
Adjustable case for Eachine TX02 / FPV camera
Authorship, licence & source
- Original author
- Vince
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 4 files · STL · STEP
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1657575
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Aircraft, Helicopters & Drones
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
Adjustable case for Eachine TX02 / FPV camera
Purpose
This model is an adjustable case designed to protect the Eachine TX02 camera, including its circuit board and antenna. It is specifically intended for mounting on an RC car.
Practical Uses
To secure the camera's orientation within the housing, an M4 screw and nut are used. The entire assembly is attached to the RC car using double-sided tape. The case is secured at the front and rear sections using two cable ties. An additional cable tie can be applied around the base of the housing's antenna area for extra stability.
Included Parts
- Front.stl
- Rear.stl
- Base plate.stl
- Caméra_Eachine_TX02.step
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.