Información del modelo
Descripción
Adapter to convert CAPART RC2 Vest Support Lanyard mounts to RC-N Style Controllers
Purpose
This adapter is designed to allow DJI RC-N1, RC-N2, and RC-N3 style controllers to be attached to a mount originally intended for the RC2 controller. The author notes the design could potentially be used for other applications requiring the specific 4mm hole spacing of the original DJI RC2 mount.
Practical Uses
It serves as a conversion tool for users who have a vest mount system designed for the RC2 controller but wish to use RC-N series controllers instead.
Included Parts
- RC_N1_2_3_Vest_Mount_V03.stl
- DJI_RCN_Clamp_Knobs_V01.stl
- RC_N123_Holder_V01.stl
Note: The author states this design was sculpted from an existing cradle design but is significantly modified from the original source.
Texto original del autor en Printables
<p>This allows the DJI RC-N1,2, and 3 style controllers to to attached to the mount originally meant to hold the RC2 controller. Could be used for any other purpose requiring the 4mm holes and spacing that the original DJI RC2 has. I found the actual cradle design somewhere and sculpted it from that however I cannot find the original info. So if someone posts I will amend and credit of course. This is significantly modified from that design.</p><p>Links:<br><a href="https://www.amazon.com/dp/B0D4QDPTZC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1">https://www.amazon.com/dp/B0D4QDPTZC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1</a></p><p> </p>
Preguntas y aportaciones