MESHOPIAModel sheet · for your workshop
Tools
Prusament PETG Functional Clamp
Authorship, licence & source
- Original author
- Prusament
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · ZIP · STL
- Declared source
- Printables · https://www.printables.com/model/758-petg-prusament-clamp
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Settings declared by the publisher
- Technology
- FDM
- Material
- PETG
- Supports
- No
- Difficulty
- Intermediate
- Layer height
- 0,20 mm
- Nozzle
- 0,4 mm
- Infill
- 25 %
Published description
WHAT IT IS AND WHAT IT IS FOR
A detachable clamp for holding parts in the workshop, performing light pressure tests, and checking the behavior of PETG.
CONTENT
The complete original Printables package is preserved (5 extracted files), in addition to a main geometry for the viewer when technical limits allow. The gallery uses only images from the original publication.
COMPATIBILITY AND USE
Print each component supported on its flat face; check the thread fit before assembly.
ORIGIN
Original author: Prusament. Source: Printables. Model: https://www.printables.com/model/758-petg-prusament-clamp. Verified license: CC0 / Public Domain. Adaptation in Meshopia: Spanish sheet, classification, and prudent recommendations; no personal print test is attributed.
WARNING
Always slice with your own printer's profile and check scale, tolerances, and safety before use.
Manufacturing & assembly notes
Prudent recommendation, not a personal test: Print each component supported on its flat face; check the thread fit before assembly. 3 perimeters; no brim. PETG: 230–245 °C nozzle and 70–85 °C bed. Initial speed 40–60 mm/s and cooling according to material. Monitor adhesion, stringing, and bridging; correct temperature, retraction, or speed. Slice with your printer's profile.
Declared changes from the original
Localized listing, classification, attribution and printing recommendations; files unchanged.