Model information
Description
A 3D model of an Abrams A1M2 tank. The author reports building the tank at a 1/20 scale using an ESP32 and a PS4 controller, though other electronic control systems may be used. The author has provided code, a parts list, and circuit diagrams via a GitHub link.
3D printing settings reported by the author:
- Filament: PLA
- General parts: 15% infill, two walls, and supports where needed.
- Delicate moving parts: 100% infill, four walls, and supports.
Original text by the author on Printables
<p>3D MODEL DESCRIPTION</p><p>This tank was built on a 1/20 scale. All STL files have been uploaded. I built my own project using an ESP32 and a PS4 controller, but you can also use a different electronic control system if you prefer. I’ve also shared all the code, parts list, and circuit diagram files via the GitHub link.</p><p><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://github.com/sozelsters/Abrams-A1M2-Project.git">https://github.com/sozelsters/Abrams-A1M2-Project.git</a></p><p>Youtube:</p><div data-youtube-video=""><iframe class="editor-youtube" width="640" height="480" allowfullscreen="true" autoplay="false" disablekbcontrols="false" enableiframeapi="false" endtime="0" ivloadpolicy="0" loop="false" modestbranding="false" origin="" playlist="" rel="1" src="https://www.youtube-nocookie.com/embed/Bx6ma8nl1Ug" start="0"></iframe></div><p>3D PRINTING SETTINGS</p><p>I used PLA filament for my 3D prints. For general parts, I used 15% infill, two walls, and supports where needed. For delicate moving parts, I used 100% infill, four walls, and supports.</p>
There are no comments yet. Verified ratings and makes appear separately below.