MESHOPIAModel sheet · for your workshop
Tools
FPV frame for 8 mm carbon tubes
Authorship, licence & source
- Original author
- Ferdous Mursalen
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 3 files · STL
- Declared source
- Printables
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Components of an FPV drone frame with 8 mm carbon fiber tube arms and motor mounts. The design allows for varying the arm length, but that possibility does not establish a validated flight configuration. The download does not include tubes, motors, propellers, or electronics.
Preparation, compatibility, and printing
The author indicates orienting the motor mounts with the screw holes facing the sides and the base plates facing up. Check this reference against each file and review the necessary supports in the slicer. Verify the motor pattern, the tube retention, and the clearances. No material or full profile is specified; the assembly requires checking rigidity and fastening before use.
Manufacturing & assembly notes
The author indicates orienting the motor mounts with the screw holes facing the sides and the base plates facing up. Check this reference against each file and review the necessary supports in the slicer. Verify the motor pattern, the tube retention, and the clearances. No material or full profile is specified; the assembly requires checking rigidity and fastening before use.
Declared changes from the original
Imported CC0 model with an automated editorial listing; the generated photographic cover is pending.