A nut wrench for RC rims. The model features a 7.1mm hex aperture. The author reports an external shaft diameter of 12mm. The author recommends printing in PLA or PETG, but specifies that the hex zone must be filled at 100% (the author used 5 wall loops with a modifier).
Original text by the author on Printables
<p>Hex aperture of the model is 7.1mm. External shaft diameter is 12mm (as a metallic bit i have).</p><p>Print in PLA or PETG but make sure the zone of the hex is filled at 100% (i set 5 wall loops with a modifier).</p><p>If you need different hex size, let me know and i publish the model (specify also the shaft external maximum diameter). </p><p></p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.