3 modelos etiquetados

#wheel hub

Descubre modelos 3D etiquetados como wheel hub y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

RC Paddle Tires and Spoke Wheels - Five Tire and Five Wheel STL Meshes

An RC paddle-wheel source project containing five hollow tire meshes with broad external paddle lugs and five separate spoke-pattern wheel meshes. The tire interiors have annular seating features; the wheels have central hub openings and a circumferential outer groove. Similar instances are retained as supplied rather than discarded based on appearance. All ten unchanged original STL files are supplied inside a losslessly compressed ZIP, with descriptive English filenames. One original wheel STL is also supplied separately for the main 3D viewer. Extract the ZIP to access the complete set. No verified vehicle scale, axle-interface size or tested chassis compatibility is supplied. The new cover pairs the five actual tire meshes with the five actual wheels concentrically, as an illustrative mounted display. Dark tires, blue wheels, a changed angle and a locally generated workshop background distinguish the cover from the supplied photograph. The arrangement does not establish a tested interference fit, secure retention or driving performance; the original downloads remain unchanged. Check tire seating, wheel grooves, hub openings and axle fastening against the intended vehicle. Tire-like geometry does not establish flexible material behavior: select suitable printing materials only after checking the project requirements. Motor, chassis, axle shafts, nuts and other hardware are not included as physical supplies. Printing settings, material specifications and tested traction or durability are not supplied. MESHOPIA has not tested printing, mounting or powered operation. The cover renders actual meshes and shadows in Blender over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Four-Wheel-Drive RC Chassis and Suspension Geometry - Twenty-Six STL Parts

A twenty-six-file four-wheel-drive-style RC chassis and suspension collection. Every original STL mesh was visually inspected using software-rendered orthographic previews. The source file named Body is a lower chassis tub with mounting features, not an exterior vehicle shell. An upper deck, front/rear bumper and shock-tower shapes, a rear wing and two wing braces form the main structure. The mechanical geometry includes front and rear suspension arms, camber links and wheel hubs; a C-shaped front hub carrier; a bearing seat; lower and upper differential housing pieces; a differential cup; a long drive shaft; a source-labeled 7 mm wheel hex; a steering bellcrank, idler arm, drag link and tie rod; and servo and body-post brackets. The wheel-hex size is a supplied filename label, not an independently measured fit specification. All twenty-six original STL files are preserved unchanged and renamed in English. Front/rear source labels indicate intended roles, but required copy counts, mirrored placements, shaft interfaces, bearing sizes and attachment hardware are unverified. No wheel or tire meshes, differential gear meshes, complete exterior body shell, shock spring/damper assembly, motor, servo, battery, controller, wiring or real metal hardware is supplied in the reviewed set. A differential housing does not by itself constitute a working differential. The new cover is a locally generated ComfyUI illustration derived from the supplied CAD-style assembled reference, with a navy chassis, ivory housings and a workshop setting. It shows empty wheel carriers without tires, wheels or complete shocks. Metallic-looking surface accents are illustrative finishing details, not supplied metal hardware. The inferred arrangement does not establish exact CAD geometry, validated joints or a working four-wheel-drive drivetrain. Actual scale, wheelbase, suspension travel, hardware compatibility, material requirements and print settings have not been independently verified. MESHOPIA has not physically printed, assembled or driven this collection.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Truck Wheel Rim — Deep Dish Design 07

A single deep cylindrical wheel rim mesh for scale-truck modelling, with the inner hub, recessed face and attachment details present in the supplied STL. The file is a rim component; it does not include a tyre, axle or complete vehicle. Compatibility with a particular truck or scale has not been verified. PACKAGE CONTENTS The complete ZIP contains the original STL geometry under a new English filename and an English file guide. The original geometry and numerical coordinates are preserved. A separate STL provides the web viewer. PREPARATION AND USE Inspect units, outer diameter, hub clearance, wall thickness and tolerances before fitting or printing. Choose supports, orientation and materials for your actual scale and load. No tested print settings or road-running assembly are claimed. ORIGINAL MESHOPIA PRESENTATION The hyperrealistic cover was created locally in ComfyUI from our Blender render of the actual rim. It shows a brushed-metal finish on a model workshop bench. The background tyre, axle and tools are illustrative and are not included. LICENSE Published by MESHOPIA under CC0 with the rights-holder authorization confirmed by the uploader.

Technology: Sin probar
material: —
Difficulty: Sin especificar