3 modelos etiquetados

#two STLs

Descubre modelos 3D etiquetados como two STLs y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Curved RC Wheel Wall Cradle - Standard and Reverse Braces - Two STLs

Organize suitable RC wheels using a curved wall cradle. Both supplied STLs have an upright backplate with two mounting holes, a curved supporting shelf and a raised front lip. The standard and reverse versions place the diagonal reinforcing brace on opposite sides. Two original STL files are included, renamed 01-wheel-wall-cradle-standard.stl and 02-wheel-wall-cradle-reverse.stl. They are alternative bracket forms, rather than two halves that must be assembled. Print the version or quantity appropriate for your installation. Wheels, vehicles and mounting hardware are not included. The original filenames identify 100 mm. This is the supplied size label; exact fit and wheel clearance have not been independently verified. Inspect the models against the intended wheels, wall and fasteners. Material, print orientation and mounting security affect performance, and no load test or tested slicer profile is supplied. The new cover shows the actual standard and reverse meshes together in a fresh studio composition with a gray finish on a pale stone surface.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Large Curved RC Vehicle Wall Supports - Left and Right STLs

Store a suitable RC vehicle using these left and right curved wall supports. Inspection of both supplied STLs shows a tall mounting backplate with two holes, a curved front retaining wall and an internal diagonal reinforcing rib. The supplied photograph shows the mirrored supports installed separately on a wall. Two original STL files are included, renamed 01-large-wall-support-left.stl and 02-large-wall-support-right.stl. Their original geometry is preserved. These are separate supports for an installation, rather than a towing hitch. No vehicle, wall fasteners or other hardware are included. The source describes a large holder but gives no verified vehicle scale or load rating. Compare the model dimensions and support spacing with your intended vehicle before printing or installation. Select fasteners for the mounting surface and assess the strength of the printed parts before use. Physical fit, load capacity and a printer profile have not been tested by MESHOPIA. The new cover renders the actual left and right meshes in a dark blue finish on a pale stone studio surface from a fresh angle.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Directional Mud-Terrain Tires for WPL RC Cars - Left and Right STLs

Create a left-and-right tire set for a suitable WPL RC vehicle with these aggressive tread meshes. Inspection of both supplied STLs shows hollow tires with large staggered tread blocks, prominent shoulder lugs and raised sidewall lettering. The tread directions differ between the files identified as left and right. Two original meshes are included: 01-left-directional-mud-tire.stl and 02-right-directional-mud-tire.stl. Their geometry and existing sidewall lettering are preserved. The metal-looking rim in the source photograph is not included; these downloads contain tire forms only, without hubs, axles or hardware. WPL is a source compatibility label. No independently verified wheel size, vehicle scale, traction rating or tested material profile is provided. Compare the inner interface, width and tread clearance with your own wheels. Material flexibility and printing choices affect installation and driving behavior. MESHOPIA has not tested fit, strength or off-road performance. The new cover renders both actual tire variants upright in a charcoal finish on a pale stone studio surface, with their centers left open.

Technology: Sin probar
material: —
Difficulty: Sin especificar