Meshopia · EnglishEnglish
MESHOPIA

2 modelos etiquetados

#test

Descubre modelos 3D etiquetados como test y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Matriz de calibración de primera capa por zonas

First layer calibration matrix by zones

Low-thickness technical part designed to quickly and comparably check how the first layer is deposited in different areas of the print bed. The matrix allows for observing variations in squish, line continuity, and adhesion without consuming much material, making it useful after leveling the bed, adjusting the Z offset, changing the print surface, or modifying the slicer profile. Each sample must be interpreted as a visual reference: separated lines usually indicate excessive height; a very squashed, rough, or translucent surface may indicate a nozzle that is too close. The model does not automatically correct mechanical problems, dirt, bed deformation, or poorly calibrated flow.

Technology
FDM
material
PLA, PETG
Difficulty
Intermedia
Vista de Bastidor FPV para tubos de carbono de 8 mm

FPV frame for 8 mm carbon tubes

Components of an FPV drone frame with 8 mm carbon fiber tube arms and motor mounts. The design allows for varying the arm length, but that possibility does not establish a validated flight configuration. The download does not include tubes, motors, propellers, or electronics. Preparation, compatibility, and printing The author indicates orienting the motor mounts with the screw holes facing the sides and the base plates facing up. Check this reference against each file and review the necessary supports in the slicer. Verify the motor pattern, the tube retention, and the clearances. No material or full profile is specified; the assembly requires checking rigidity and fastening before use.

Technology
Sin probar
material
—
Difficulty
Sin especificar