4 modelos etiquetados

#STL body panels

Descubre modelos 3D etiquetados como STL body panels y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Cyber Brick-Style Open-Wheel RC Drift Model Geometry - Twenty STL Files

A twenty-file Cyber Brick-style RC drift-model geometry collection with a low open-wheel racing appearance. All original STL meshes were visually reviewed using software-rendered orthographic previews. The set contains lower chassis/nose geometry, tapered and curved exterior panels, a broad upper body panel, an open curved frame, wing-shaped details, a chassis housing with a circular bore, mounting and pivot brackets, a forked guide plate, a ribbed column with base, a toothed linkage rack, two round hex-bore sleeves and four separate wheel reference meshes. All twenty original STL files are preserved unchanged and renamed in English. The source filenames are mostly numbered identifiers, so English names describe visible geometry rather than certifying undocumented mechanical functions. The four wheel meshes have broad smooth rolling surfaces; the source photograph appears more textured and does not establish included tread geometry. Inspect wheel variants and mating interfaces before planning prints. The source photograph shows an assembled open-wheel example. A new locally generated ComfyUI cover may use that photograph as an illustrative assembly reference with changed colors, viewpoint and workshop background. The image must not be interpreted as an exact CAD reconstruction, verified fit or evidence of tested drift behavior. Real Cyber Brick controller hardware, motor, servo, battery, electronics, wiring, bearings and metal fasteners are not supplied. Model scale, wheelbase, motor/servo compatibility, steering travel, tire material, print settings and required copy counts have not been independently verified. MESHOPIA has not physically printed, assembled or driven this collection. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-model photograph, with cobalt and ivory panels, smooth charcoal wheels and a new workshop viewpoint. It conveys an assembled appearance rather than a certified rendering of every STL. Visible finishing details and inferred placements do not establish component fit or a tested RC build.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

GT-R R35-Style Body Panels and Wheel Geometry - Fifty-Nine Original STL Files

A fifty-nine-file GT-R R35-style miniature body and wheel geometry collection. Every original STL was visually reviewed in five geometry contact sheets. The set includes a large body shell, a separate front fascia section, broad exterior panels, thin triangular and tapered inserts, long trim strips, a patterned grille panel, recessed front-lamp-like geometry, rear relief panels, paired hollow detailing tubes and a raised GTR emblem mesh. Solid light/window-like inserts do not supply working lights or transparent glazing. Four multi-spoke rim meshes, four smooth tire rings and four further tire rings with inner ribs are supplied. These groups may represent alternatives or overlapping files; they are not a validated bill of materials. No separate tread texture is established by the reviewed smooth tire surfaces. Three original files carry SVJ source names and contain two door/mirror panels and a curved wing-like panel. Those inconsistent identifiers are preserved in the filename mapping; their fit with the GT-R-style shell has not been verified. All fifty-nine original STL files remain unchanged and are renamed in English according to visually observed geometry. Most source names are opaque numbered identifiers, so component roles are descriptive rather than certified assembly instructions. The folder and many source names state 1:12, but actual scale, panel dimensions, printing quantities, tire material and donor-chassis interfaces have not been independently verified. No complete mechanical RC chassis, suspension/drivetrain, real motor, servo, controller, receiver, battery, wiring, bearings, lights or metal hardware is supplied. Inspect thin panels, overlaps and mating surfaces before printing. MESHOPIA has not physically printed, assembled or driven this collection. No tested print settings, material requirements, vehicle performance or manufacturer affiliation are claimed. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-model photograph, with dark green and ivory finishes and a changed viewpoint and background. Smooth wheel surfaces and an empty cockpit are shown. Interior finishes, glazing, grille texture and visible assembly details are illustrative rather than verified separate files or exact CAD fits. It does not certify mechanical operation or a tested RC build.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

WRX STI 22B-Style Body Panels and Wheels - Fifty-Three Original STL Files

A fifty-three-file WRX STI 22B-style miniature body and wheel geometry collection. Every original STL was visually reviewed in five geometry contact sheets. It includes a large body-shell section, front fascia shell, separate door/mirror panels, broad curved and tapered panels, patterned grille inserts, recessed light-like details, thin triangular plates, long trim strips, small rounded inserts and a hollow tube/block detailing group. Solid window-like and light-like panels do not provide transparent glazing or working lights. Four multi-spoke rim meshes, four smooth tire-ring meshes and four further tire rings with internal ribs are supplied. These groups may represent alternatives or overlapping geometry; the source file count is not a verified bill of materials. Most original filenames use opaque numbered identifiers, so the English filenames describe observed shapes rather than certifying undocumented assembly roles. All fifty-three original STL files remain unchanged and are renamed in English. Source names state 1:12, but actual scale, panel dimensions, required copies, wheel interfaces, tire material and donor-chassis fit have not been independently verified. The reviewed set does not establish a complete mechanical RC chassis, suspension, drivetrain or electronic system. Real motors, servos, receiver, controller, battery, wiring, lights, bearings and metal hardware are not supplied. Inspect thin surfaces, overlapping variants and mating panels before printing. MESHOPIA has not physically printed, assembled or driven this collection. No tested print settings, material requirements, manufacturer affiliation or vehicle performance are claimed. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-body photograph, with pearl ivory and burgundy finishes, graphite rims and a changed camera and workshop background. Smooth tire surfaces are shown. Interior, glazing, lights and grille finishes are illustrative and do not establish separate included files or verified panel fit. No working RC assembly is claimed.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Aventador SVJ-Style Body Panels and Wheels - Sixty-Eight Original STL Files

A sixty-eight-file Aventador SVJ-style miniature body-panel and wheel geometry collection. Every original STL was visually reviewed in six contact sheets. Two large body-shell sections are accompanied by angular fascia sections, a rear body frame, curved wing panel, mirror forms, thin glazing-like panels, recessed lamp-like and vent panels, long trim strips, fender-like strips and two hollow decorative tubes. Some small inserts have ambiguous intended placement and are named by visible shape rather than claiming a verified assembly role. The wheel group includes four multi-spoke rim meshes, four smooth tire-ring meshes and four tire rings with internal ribs. The smooth and internally ribbed rings are retained as alternative geometry, not twelve validated wheels for one car. Solid glazing-like and lamp-like meshes are plastic geometry, not separate glass, LEDs or functioning lights. Source filenames mix Aventador SVJ 119, RC Aventador SVJ 112 and RC 112 SVJ labels. These source identifiers suggest different scale or variant contexts, but actual dimensions, mutual compatibility and a single consistent scale are not verified. No assumption is made that all sixty-eight files fit one body. The count is not a validated bill of materials; individual meshes may include multiple disconnected details or alternatives. All sixty-eight original STL files remain unchanged and are renamed in English with a map to every source name. Wheelbase, chassis compatibility, mounting interfaces, printed quantities, tolerances and assembly sequence remain unverified. No complete RC chassis, functional drivetrain, real motor, servo, controller, receiver, battery, wiring, metal hardware or functioning lights are supplied. MESHOPIA has not physically printed, assembled or driven this collection. No tested settings, driving performance or manufacturer affiliation is claimed. The new locally generated ComfyUI cover uses the supplied assembled reference with violet and ivory finishes, graphite multi-spoke wheels and a new workshop background. Smooth tire-ring appearance is retained. The window reflections, interior appearance, grille finishes and small decorative surface accents are illustrative visual finishes, not separately supplied materials or verified mesh details. Inferred assembled placement does not establish compatibility between the mixed source variants, a functional RC build or manufacturer affiliation.

Technology: Sin probar
material: —
Difficulty: Sin especificar