6 modelos etiquetados

#smooth tire rings

Descubre modelos 3D etiquetados como smooth tire rings y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Audi S1 E2-Style Rally Body Panels and Wheels - Fifty-Seven Original STL Files

A fifty-seven-file Audi S1 E2-style rally-car body and wheel geometry collection. Every supplied STL was visually reviewed in five geometry contact sheets. It contains two large exterior body sections with wheel openings, multiple curved and angular body/detail panels, recessed and raised rectangular inserts, a front fascia relief, a four-ring emblem mesh, long trim/channel pieces and a separate rear wing. Four smooth tire-ring meshes, four further smooth tire rings with inner ribs and four wheel-rim meshes are supplied. Alternative or repeated-looking files may overlap; source file counts are not a verified bill of materials. Solid light/window-like inserts do not provide LEDs or glazing material. All fifty-seven original STL files remain unchanged and are renamed in English. Most source names are opaque numbered identifiers, so filenames describe visually observed shapes without certifying undocumented component functions. The source names state 1:12; actual scale, panel fit, wheel interfaces, printing quantities and donor-chassis compatibility have not been independently verified. The collection primarily depicts body and wheel geometry, not a complete mechanical RC chassis, suspension, drivetrain or electronic system. Real motors, servos, controller, battery, wiring, bearings and fasteners are not supplied. Inspect thin panels, mating surfaces and mesh overlaps before printing. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-model photograph, with blue and ivory finishes and a changed workshop viewpoint and background. It illustrates exterior appearance rather than an exact rendering of all supplied meshes. Interior seats, transparent-looking glazing, lights and surface finishes in the illustration do not establish that those details or materials are included as separate files. The supplied tire surfaces are smooth. Exact panel fit and working RC performance remain unverified. MESHOPIA has not physically printed, assembled or driven this collection. No tested print settings, material requirements or assembly instructions are claimed.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

GT-R R35-Style Body Panels and Wheel Geometry - Fifty-Nine Original STL Files

A fifty-nine-file GT-R R35-style miniature body and wheel geometry collection. Every original STL was visually reviewed in five geometry contact sheets. The set includes a large body shell, a separate front fascia section, broad exterior panels, thin triangular and tapered inserts, long trim strips, a patterned grille panel, recessed front-lamp-like geometry, rear relief panels, paired hollow detailing tubes and a raised GTR emblem mesh. Solid light/window-like inserts do not supply working lights or transparent glazing. Four multi-spoke rim meshes, four smooth tire rings and four further tire rings with inner ribs are supplied. These groups may represent alternatives or overlapping files; they are not a validated bill of materials. No separate tread texture is established by the reviewed smooth tire surfaces. Three original files carry SVJ source names and contain two door/mirror panels and a curved wing-like panel. Those inconsistent identifiers are preserved in the filename mapping; their fit with the GT-R-style shell has not been verified. All fifty-nine original STL files remain unchanged and are renamed in English according to visually observed geometry. Most source names are opaque numbered identifiers, so component roles are descriptive rather than certified assembly instructions. The folder and many source names state 1:12, but actual scale, panel dimensions, printing quantities, tire material and donor-chassis interfaces have not been independently verified. No complete mechanical RC chassis, suspension/drivetrain, real motor, servo, controller, receiver, battery, wiring, bearings, lights or metal hardware is supplied. Inspect thin panels, overlaps and mating surfaces before printing. MESHOPIA has not physically printed, assembled or driven this collection. No tested print settings, material requirements, vehicle performance or manufacturer affiliation are claimed. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-model photograph, with dark green and ivory finishes and a changed viewpoint and background. Smooth wheel surfaces and an empty cockpit are shown. Interior finishes, glazing, grille texture and visible assembly details are illustrative rather than verified separate files or exact CAD fits. It does not certify mechanical operation or a tested RC build.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

WRX STI 22B-Style Body Panels and Wheels - Fifty-Three Original STL Files

A fifty-three-file WRX STI 22B-style miniature body and wheel geometry collection. Every original STL was visually reviewed in five geometry contact sheets. It includes a large body-shell section, front fascia shell, separate door/mirror panels, broad curved and tapered panels, patterned grille inserts, recessed light-like details, thin triangular plates, long trim strips, small rounded inserts and a hollow tube/block detailing group. Solid window-like and light-like panels do not provide transparent glazing or working lights. Four multi-spoke rim meshes, four smooth tire-ring meshes and four further tire rings with internal ribs are supplied. These groups may represent alternatives or overlapping geometry; the source file count is not a verified bill of materials. Most original filenames use opaque numbered identifiers, so the English filenames describe observed shapes rather than certifying undocumented assembly roles. All fifty-three original STL files remain unchanged and are renamed in English. Source names state 1:12, but actual scale, panel dimensions, required copies, wheel interfaces, tire material and donor-chassis fit have not been independently verified. The reviewed set does not establish a complete mechanical RC chassis, suspension, drivetrain or electronic system. Real motors, servos, receiver, controller, battery, wiring, lights, bearings and metal hardware are not supplied. Inspect thin surfaces, overlapping variants and mating panels before printing. MESHOPIA has not physically printed, assembled or driven this collection. No tested print settings, material requirements, manufacturer affiliation or vehicle performance are claimed. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-body photograph, with pearl ivory and burgundy finishes, graphite rims and a changed camera and workshop background. Smooth tire surfaces are shown. Interior, glazing, lights and grille finishes are illustrative and do not establish separate included files or verified panel fit. No working RC assembly is claimed.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

McLaren 720S-Style Body Panels and Wheels - Fifty-Eight Original STL Files

A fifty-eight-file McLaren 720S-style miniature body and wheel geometry collection. Every original STL was visually reviewed in five contact sheets. It includes a large shell section, two door/mirror panels, broad curved body panels, long recessed trim forms, rounded and triangular inserts, curved strips, a broad panel with a cutout, a curved crossbar detail and recessed headlamp-like relief panels. The geometry shows visibly faceted curved surfaces in several files. Solid light and glazing-like inserts do not provide LEDs or transparent materials. Four smooth tire rings and four multi-spoke rim meshes are supplied. Two additional body-section files carry GT-RC-4S source identifiers and have body-shell shapes. Their source identity and compatibility with the McLaren-style components are inconsistent and unverified; they remain included unchanged with their original names recorded in the mapping. Two C-shaped mounting forms are also included, but a complete mechanical chassis or documented drivetrain cannot be established from this set. All fifty-eight original STL files are preserved unchanged and renamed in English according to observed shapes. Most source names are opaque numbered identifiers. Repeated-looking panels and source variants are not a verified bill of materials. Source labels state 1:12, but actual scale, panel dimensions, required quantities, wheel interfaces and donor-chassis fit have not been independently checked. Real motors, servos, controller, receiver, battery, wiring, lights, bearings and metal hardware are not supplied. Inspect faceting, thin surfaces, alternate body sections and mating panels before printing. MESHOPIA has not physically printed, assembled or driven the collection. No tested print settings, material requirements, manufacturer affiliation or working RC performance are claimed. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-body photograph, with ice-blue and navy finishes, a changed viewpoint and a new workshop background. Interior, glazing, lamp finishes, brake-like accents and other surface details are illustrative, not verified separately supplied files. Tire surface finishing does not establish extra textured-tire geometry. Exact panel fit and working RC performance remain unverified.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Aventador SVJ-Style Body Panels and Wheels - Sixty-Eight Original STL Files

A sixty-eight-file Aventador SVJ-style miniature body-panel and wheel geometry collection. Every original STL was visually reviewed in six contact sheets. Two large body-shell sections are accompanied by angular fascia sections, a rear body frame, curved wing panel, mirror forms, thin glazing-like panels, recessed lamp-like and vent panels, long trim strips, fender-like strips and two hollow decorative tubes. Some small inserts have ambiguous intended placement and are named by visible shape rather than claiming a verified assembly role. The wheel group includes four multi-spoke rim meshes, four smooth tire-ring meshes and four tire rings with internal ribs. The smooth and internally ribbed rings are retained as alternative geometry, not twelve validated wheels for one car. Solid glazing-like and lamp-like meshes are plastic geometry, not separate glass, LEDs or functioning lights. Source filenames mix Aventador SVJ 119, RC Aventador SVJ 112 and RC 112 SVJ labels. These source identifiers suggest different scale or variant contexts, but actual dimensions, mutual compatibility and a single consistent scale are not verified. No assumption is made that all sixty-eight files fit one body. The count is not a validated bill of materials; individual meshes may include multiple disconnected details or alternatives. All sixty-eight original STL files remain unchanged and are renamed in English with a map to every source name. Wheelbase, chassis compatibility, mounting interfaces, printed quantities, tolerances and assembly sequence remain unverified. No complete RC chassis, functional drivetrain, real motor, servo, controller, receiver, battery, wiring, metal hardware or functioning lights are supplied. MESHOPIA has not physically printed, assembled or driven this collection. No tested settings, driving performance or manufacturer affiliation is claimed. The new locally generated ComfyUI cover uses the supplied assembled reference with violet and ivory finishes, graphite multi-spoke wheels and a new workshop background. Smooth tire-ring appearance is retained. The window reflections, interior appearance, grille finishes and small decorative surface accents are illustrative visual finishes, not separately supplied materials or verified mesh details. Inferred assembled placement does not establish compatibility between the mixed source variants, a functional RC build or manufacturer affiliation.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Chiron Pur Sport-Style Body Panels and Wheel Geometry - Fifty-Four STL Files

A fifty-four-file Chiron Pur Sport-style miniature body and wheel geometry collection. Every original STL was visually reviewed in five geometry contact sheets. The set contains two large body side-shell sections, two door/mirror panels, long side sills, curved exterior sections and fascia shapes, recessed lamp-like housings, thin angular inserts, a front grille with a central opening, perforated grille inserts and trim/detail pieces. Four multi-spoke rim meshes, four smooth tire-ring meshes and four further tire rings with inner ribs are also supplied. These groups may include repeated or alternative geometry; their quantity does not establish a verified bill of materials. The supplied tire surfaces are smooth, so a road-car photograph must not be treated as proof of a supplied tread pattern. All fifty-four original STL files are preserved unchanged and renamed in English. Most source identifiers are opaque; English labels describe visible geometry without certifying undocumented component roles. The folder and most file names state 1:12, while six final source files state 1:19. These inconsistent source labels are retained in metadata where relevant; actual scales and cross-group fit have not been verified. The source photo depicts an assembled sports-car body with wheels. The reviewed meshes do not provide a complete mechanical RC chassis, steering/drivetrain, real motor, servo, battery, electronics, lighting, glazing material, bearings or fasteners. Solid window and lamp-like inserts are geometry rather than working lights or transparent glass. Inspect panel joins, wheel interfaces, mesh overlaps and dimensions before printing. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-model photograph, with blue and ivory finishes and a changed workshop viewpoint and background. It illustrates exterior appearance rather than an exact rendering of all supplied meshes. Interior seats, transparent-looking glazing, lights and surface finishes in the illustration do not establish that those details or materials are included as separate files. The supplied tire surfaces are smooth. Exact panel fit and working RC performance remain unverified. MESHOPIA has not physically printed, assembled or driven this collection. No tested print settings, material requirements, assembly instructions or licensed manufacturer affiliation are claimed.

Technology: Sin probar
material: —
Difficulty: Sin especificar