6 modelos etiquetados

#RC body shell

Descubre modelos 3D etiquetados como RC body shell y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Body Shell and Two Rear Wing Variants for Losi Micro-B RC Projects - 3MF

Customize a Losi Micro-B project with this body-shell and rear-wing collection. The inspected body mesh has a raised angular cabin, curved side panels, projecting end details and an open underside. Two wing files provide a stepped wing with raised outer ends and two central mounting holes, plus a second variant with an additional longitudinal strip. The source identifies Losi Micro-B; fit has not been independently checked. Three original 3MF files are included and renamed in English: rear wing variant 1, rear wing variant 2 and the body shell. The first wing and the body each contain one mesh object; the second wing contains two objects. Their source component arrangements remain unchanged in the download. Inspect the additional strip and slicer object grouping before treating the second file as a single printable part. The new cover shows the actual body and both wing variants separately in rose, blue and sand colors. The chassis, wheels, suspension, motor, electronics and mounting hardware seen in the original photograph are not included. This collection supplies exterior parts rather than a complete RC car. Check body clearances, mounting tabs, wing holes and your particular chassis before printing. No tested printing profile was supplied, and MESHOPIA has not tested fit, assembly or strength. Blender renders the original geometry and shadows. A workshop background generated locally in ComfyUI is composited around the parts without altering their shapes.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

City Turbo-Style RC Body Shell and Alternative Front and Rear Sections - 1:10 Source Project

Three printable body meshes from a Honda City Turbo Tamiya-replica RC body source project labeled 1:10. The full shell has an upright compact hatchback profile, open window apertures, round headlamp openings, front grille details, hood vents, pronounced wheel arches and molded door outlines. Two additional meshes provide alternative front and rear body sections. These are alternatives to the full shell, rather than three pieces that must all be joined together. The download contains three unchanged original STL files renamed in English. The 1:10 scale and Honda/Tamiya references identify the supplied source project; dimensions and fit to a particular RC chassis have not been independently validated. No official manufacturer affiliation is implied. The new cover displays the actual complete body mesh in blue and the two alternative sections separately in a sand tone, with a changed viewing angle and workshop background. It shows the printable body components supplied by the files. Wheels, chassis, glazing, lights, electronics, fasteners and other physical hardware are not included. Check body dimensions, wheelbase, wheel clearance, mounting positions and section mating surfaces against your intended vehicle before fabrication. A tested print profile, assembly procedure and hardware bill of materials are not supplied. MESHOPIA has not tested printing, fit or vehicle operation. The cover renders the actual meshes and shadows in Blender over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Hummer-Style RC Body Shell Sections and Lamp Details - Ten STL Files

A ten-file Hummer-style RC body collection with two source-labeled size sets. Source meshes were inspected individually in Blender. Each set includes front, middle and rear body sections, a large round lamp-detail shape and a smaller lamp-detail shape. The body geometry includes an angular hood and front grille, windshield and side-window openings, modeled door and hinge details, wheel arches, roof surfaces, rear panel details and internal joining or mounting tabs. Doors and rear panels are modeled surface details rather than verified moving doors. Five files are stored in the original 1-14 scale subfolder. Five corresponding files are in the archive root; the purchased folder labels the overall pack as 1:10 and 1:14. The English filenames preserve the explicit 1:14 source designation and identify the other set as the root set. Physical scale and donor-chassis fit have not been independently validated. All ten original STL files are preserved unchanged and renamed in English. No complete chassis, wheels, tires, steering mechanism, motor, electronics, wiring or battery is supplied as a separate model file. The source photograph shows a finished RC vehicle with additional running gear and equipment; those items are not part of this body-only download. Lamp geometry does not include working LEDs or a validated electrical installation. The new cover renders the actual three root-set body section meshes in Blender, presented in a blue finish on a locally generated ComfyUI workshop background. Their orientations and near-assembled display positions are inferred, with visible section joints; they are not verified assembly instructions or fit measurements. No seats, chassis, wheels or electrical equipment have been added. The two lamp-detail shapes and the separate source-labeled 1:14 set remain included in the download even though they are not individually displayed in this cover. No printing material, supports, layer height, fasteners, assembly instructions or tested vehicle compatibility has been verified. Inspect the split-body interfaces and mounting surfaces against your project before printing. MESHOPIA has not physically printed, assembled or tested this collection.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

GT-R R35-Style Body Panels and Wheel Geometry - Fifty-Nine Original STL Files

A fifty-nine-file GT-R R35-style miniature body and wheel geometry collection. Every original STL was visually reviewed in five geometry contact sheets. The set includes a large body shell, a separate front fascia section, broad exterior panels, thin triangular and tapered inserts, long trim strips, a patterned grille panel, recessed front-lamp-like geometry, rear relief panels, paired hollow detailing tubes and a raised GTR emblem mesh. Solid light/window-like inserts do not supply working lights or transparent glazing. Four multi-spoke rim meshes, four smooth tire rings and four further tire rings with inner ribs are supplied. These groups may represent alternatives or overlapping files; they are not a validated bill of materials. No separate tread texture is established by the reviewed smooth tire surfaces. Three original files carry SVJ source names and contain two door/mirror panels and a curved wing-like panel. Those inconsistent identifiers are preserved in the filename mapping; their fit with the GT-R-style shell has not been verified. All fifty-nine original STL files remain unchanged and are renamed in English according to visually observed geometry. Most source names are opaque numbered identifiers, so component roles are descriptive rather than certified assembly instructions. The folder and many source names state 1:12, but actual scale, panel dimensions, printing quantities, tire material and donor-chassis interfaces have not been independently verified. No complete mechanical RC chassis, suspension/drivetrain, real motor, servo, controller, receiver, battery, wiring, bearings, lights or metal hardware is supplied. Inspect thin panels, overlaps and mating surfaces before printing. MESHOPIA has not physically printed, assembled or driven this collection. No tested print settings, material requirements, vehicle performance or manufacturer affiliation are claimed. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-model photograph, with dark green and ivory finishes and a changed viewpoint and background. Smooth wheel surfaces and an empty cockpit are shown. Interior finishes, glazing, grille texture and visible assembly details are illustrative rather than verified separate files or exact CAD fits. It does not certify mechanical operation or a tested RC build.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

WRX STI 22B-Style Body Panels and Wheels - Fifty-Three Original STL Files

A fifty-three-file WRX STI 22B-style miniature body and wheel geometry collection. Every original STL was visually reviewed in five geometry contact sheets. It includes a large body-shell section, front fascia shell, separate door/mirror panels, broad curved and tapered panels, patterned grille inserts, recessed light-like details, thin triangular plates, long trim strips, small rounded inserts and a hollow tube/block detailing group. Solid window-like and light-like panels do not provide transparent glazing or working lights. Four multi-spoke rim meshes, four smooth tire-ring meshes and four further tire rings with internal ribs are supplied. These groups may represent alternatives or overlapping geometry; the source file count is not a verified bill of materials. Most original filenames use opaque numbered identifiers, so the English filenames describe observed shapes rather than certifying undocumented assembly roles. All fifty-three original STL files remain unchanged and are renamed in English. Source names state 1:12, but actual scale, panel dimensions, required copies, wheel interfaces, tire material and donor-chassis fit have not been independently verified. The reviewed set does not establish a complete mechanical RC chassis, suspension, drivetrain or electronic system. Real motors, servos, receiver, controller, battery, wiring, lights, bearings and metal hardware are not supplied. Inspect thin surfaces, overlapping variants and mating panels before printing. MESHOPIA has not physically printed, assembled or driven this collection. No tested print settings, material requirements, manufacturer affiliation or vehicle performance are claimed. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-body photograph, with pearl ivory and burgundy finishes, graphite rims and a changed camera and workshop background. Smooth tire surfaces are shown. Interior, glazing, lights and grille finishes are illustrative and do not establish separate included files or verified panel fit. No working RC assembly is claimed.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Muscle Car V2-Style Body Chassis and Tire Alternatives - Thirty-Six STL Files

A thirty-six-file Muscle Car V2-style miniature RC body and chassis geometry collection. All original STL files were visually reviewed in three geometry contact sheets. The main coupe body shell includes sculpted fenders, roof, door relief and rear light-like recesses. Separate front, rear and paired side window panels, decorative exhaust forms and LED-related mounting/test forms accompany it. Window meshes are solid geometry, not supplied transparent glazing; the LED test shapes are not electrical devices. Mechanical geometry includes a main frame, upper and lower drivetrain housings, upper/lower suspension arms, front suspension frame, two wheel hubs, steering links, servo mount, cross-shaped battery cover, a source-labeled steering rack and gear-shift link. The rack name includes 9gmw, retained only as source context rather than verified servo compatibility. Four rim/wheel forms and four patterned tire rings labeled TPU are supplied alongside two further source-38 tire variants. These groups require independent choice of material, printing quantities and fits. All thirty-six original STL files are preserved unchanged and renamed in English. Repeated-looking components and test variants are not a verified bill of materials. Source-38 is a variant identifier, not an independently established diameter or scale. Actual wheelbase, scale, steering geometry, bearing sizes, motor fit, drivetrain engagement, tire flexibility and material requirements remain unverified. No real motor, servo, controller, receiver, battery, wiring, LEDs, bearings or metal fasteners are supplied. Inspect the tire alternatives, small LED forms, thin panels and mating faces before printing. MESHOPIA has not physically printed, assembled or driven this collection. No tested print settings, speed performance or manufacturer affiliation are claimed. The new cover is a locally generated ComfyUI illustration based on the supplied assembled-body photo, with burgundy and ivory finishes and a new workshop background. It preserves the simplified rectangular light blocks and vertical grille layout of the reference. The first candidate with round lamps was rejected. Wheel spoke appearance follows the reference photograph rather than certifying the exact supplied rim meshes; inspect the individual files for their actual geometry. Painted surfaces, inferred tire appearance and assembled placements remain illustrative, not a verified RC build.

Technology: Sin probar
material: —
Difficulty: Sin especificar