Meshopia · EnglishEnglish
MESHOPIA

5 modelos etiquetados

#pro

Descubre modelos 3D etiquetados como pro y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de DJI Mini 4 Pro: modelo de referencia para diseñar accesorios

DJI Mini 4 Pro: reference model for designing accessories

Digital model of the DJI Mini 4 Pro intended as a reference for preparing accessories. It allows for studying the drone's shape and planning mounts or housings in a design program. The download does not constitute a functional drone or a flight kit: printing its silhouette does not reproduce motors, electronics, or mechanisms. The source does not provide tolerances that allow the mesh to be used as a certified dimensional pattern. Preparation, compatibility, and printing Import the file while maintaining its scale and compare the contact areas with the actual drone before designing a final part. For a fit test, print only the necessary region when your software allows it. Do not assume that a part designed around this reference will leave sensors, ventilation, or joints clear. There is no documented print profile.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de DJI Mavic 3 Pro: referencia 3D para accesorios

DJI Mavic 3 Pro: 3D reference for accessories

Digital reference of the DJI Mavic 3 Pro obtained by the author by converting DJI GLB models to STL format. Its purpose is to serve as support for accessory design or the creation of a scale model. It is not a set of parts to manufacture a flying drone, and the source expressly states this. It also does not provide an independent dimensional verification of the converted models. Preparation, compatibility, and printing Check units, scale, and dimensions against the actual equipment before designing clamps or mounts. A printed scale model can be useful for studying volumes, but it does not validate a fit on its own. The drone's geometry and its fine details may require supports depending on the orientation; check the slicer preview. Material, layer, and infill are not documented.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Patín de techo para Hobby Plus CR18P Evo Pro

Roof skid for Hobby Plus CR18P Evo Pro

Skid designed to be placed on the roof of the Hobby Plus CR18P Evo Pro. It is a specific body accessory intended for the upper area of the crawler. The source does not detail the fastening method nor certify structural protection or rollover resistance; its nominal compatibility does not replace verification with the actual body. Preparation, compatibility, and printing Place the model on the roof and check supports, holes, and clearances before printing the final version. Pay attention to thin areas that could be damaged when removing supports. No material, layer, or infill are documented. Choose the finish and orientation according to the geometry, without altering the mounting points to fit them by pressure.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Separadores de llanta para DKS Pro de DukeDoks

Wheel spacers for DukeDoks DKS Pro

Spacers designed to prevent certain commercial wheels from rubbing against the suspension arms of the DukeDoks DKS Pro. The source offers thicknesses of 1, 2, 3, 4, and 5.5 mm. The fit depends on the wheel, the tire, and the actual configuration; adding spacing also modifies the wheel's position relative to the axle. Preparation, compatibility, and printing The author relates 1 mm to M3 × 16 screw, 2 and 3 mm to M3 × 18, 4 mm to M3 × 20, and 5.5 mm to M3 × 25. Check that the chosen length reaches the nut without bottoming out. Use PLA and perimeters until the section is filled. Before riding, rotate and articulate each wheel to confirm that the rubbing disappears without creating another point of contact.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Estuche sencillo para Beacon y joysticks HOVERAir X1 Pro/ProMax

Simple case for Beacon and joysticks for HOVERAir X1 Pro/ProMax

Identified carrying case or holder for the Beacon and the joysticks of the HOVERAir X1 Pro/ProMax. The source aims to keep these accessories together and facilitate their preparation. It does not document protection against impacts, water, or dust, nor does it claim to be suitable for transporting the complete drone. Preparation, compatibility, and printing Check which accessories fit into the housings and check their removal before printing. The fit must hold them without pressing buttons or connectors. No material, layer, or infill is documented. An initial test of the cavities will allow checking tolerances without assuming that all revisions of the accessories share the same dimensions.

Technology
Sin probar
material
—
Difficulty
Sin especificar