Meshopia · EnglishEnglish
MESHOPIA

2 modelos etiquetados

#games

Descubre modelos 3D etiquetados como games y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Palanca para mando Xbox y simulador de drones

Lever for Xbox controller and drone simulator

Accessory placed over an Xbox controller stick to use it as a lever in a drone simulator. Its function is to modify the grip of the controller during the simulation; it does not convert the controller into a radio control transmitter nor does it add direct communication with a drone. The source does not identify all compatible controller revisions. Preparation, compatibility, and printing The author specifies PLA and supports. Compare the housing with your controller's stick and check that the accessory does not press buttons or limit the range of motion. Carefully remove the supports in the engagement areas. Start with a fit test without forcing the stick; then configure sensitivity and calibration within the simulator.

Technology
Sin probar
material
PLA
Difficulty
Sin especificar
Vista de Separadores de llanta para DKS Pro de DukeDoks

Wheel spacers for DukeDoks DKS Pro

Spacers designed to prevent certain commercial wheels from rubbing against the suspension arms of the DukeDoks DKS Pro. The source offers thicknesses of 1, 2, 3, 4, and 5.5 mm. The fit depends on the wheel, the tire, and the actual configuration; adding spacing also modifies the wheel's position relative to the axle. Preparation, compatibility, and printing The author relates 1 mm to M3 × 16 screw, 2 and 3 mm to M3 × 18, 4 mm to M3 × 20, and 5.5 mm to M3 × 25. Check that the chosen length reaches the nut without bottoming out. Use PLA and perimeters until the section is filled. Before riding, rotate and articulate each wheel to confirm that the rubbing disappears without creating another point of contact.

Technology
Sin probar
material
—
Difficulty
Sin especificar