MESHOPIAScale modelling & RC5 modelos etiquetados
3D printed parts for FRC team 3038's Shallow Cage Climber mechanism. The mechanism consists of one unit of 3038-25-P-00-021. The author reports these were printed in PETG.
3D printed parts for FRC team 3038's Coral Outtake mechanism. The mechanism consists of one 3038-25-P-05-007 and two 3038-25-P-05-008. The author reports all parts were printed in PETG.
3D printed parts for FRC team 3038's elevator mechanism. The mechanism consists of: - QTY 5 of 3038-25-P-08-011 - QTY 4 of 3038-25-P-08-014 - QTY 6 of 3038-25-P-08-015 (the author lists TPU as the material used) - QTY 2 of 3038-25-P-08-023 - QTY 2 of 3038-25-P-98-045 - QTY 2 of 3038-25-P-98-047 - QTY 2 of 3038-25-P-98-048 The author reports that all parts besides 3038-25-P-08-015 are printed in PETG.
Mount for a FRC break beam sensor. The author states it is intended to mount with 3M VHB tape and can be printed out of PLA or PETG.
Originally made for FRC Team 6996's Koala Mascot located on the side of their robot. The ziptie slot fits a ziptie of 4.7mm wide and 1.2mm thick; the author states it will fit most ziptie slots and includes a spot for the ziptie head to rest inside the helmet. The author advises: "Safety FIRST!" Print Profile: 0.025mm, 5% Grid Infill. Variable layer height is recommended for the rim of the helmet. The author notes that printing time will be affected whether variable layer height is turned on or off. Pre-sliced files are provided for i3 Mk3, Mk4s, Core One and XL with 0.4mm Nozzles using eSun PLA+. Files: - Koala Mascot Helmet.3mf - Koala Mascot Helmet_0.05mm_PLA_MK3_4h20m.gcode - Koala Mascot Helmet (1)_0.4n_0.025mm_PLA_XLIS_2h3m.bgcode - Koala Mascot Helmet_0.4n_0.025mm_PLA_MK4S_1h46m.bgcode - Koala Mascot Helmet (1)_0.4n_0.025mm_PLA_COREONE_1h38m.bgcode