3 modelos etiquetados

#deep barrel

Descubre modelos 3D etiquetados como deep barrel y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Six-Spoke Deep-Barrel RC Wheel Rims - Four STL Variants

Customize an RC wheel setup with a six-spoke rim design. The supplied geometry has a deep cylindrical barrel, a recessed spoke center and a raised outer lip. The source photograph shows this style of wheel installed on a scale RC car; the vehicle and tire shown in that photograph are not supplied as part of this download. Four STL files are included. Two original filenames carry an 11mm label and refer to a 9mm tire tread, while the other two carry a 9mm label. The files have been renamed in English as two 11mm-label rim variants and two 9mm-label rim variants, with numbered names distinguishing the individual files. The original filenames identify the design as a TE37-style RC wheel. These names describe the source labels; tire fit, drive interface and exact installed dimensions have not been independently verified. Inspect each variant in your slicer and compare the wheel interfaces with your tire and running gear before printing. The package includes printable rim geometry only, with no separate tires, axles, fasteners or RC vehicle. No physical fit test or tested printing profile is documented. Choose material, orientation and supports after checking the geometry for your intended use. The MESHOPIA cover is a locally generated visualization based on a Blender render of one included rim. Color, finish and studio lighting illustrate a possible appearance.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Five-Spoke Drift Wheel Rim for 1-10 RC Cars - STL and 3MF

Create a wheel-rim option for a suitable 1:10 RC drift car with this five-spoke design. Inspection of the supplied STL shows five broad spokes surrounding the central opening, a deep cylindrical barrel and raised circumferential lips. The folder identifies Tamiya and 1:10; these are supplied compatibility and scale labels. Two original files are included: 01-five-spoke-drift-rim.3mf and 02-five-spoke-drift-rim.stl. They provide the source project and mesh forms of the rim design, rather than a complete set of tires or a vehicle. Project contents and geometry are preserved. Tires, wheel nuts, axles and other hardware are not included. Check axle interface, offset, rim diameter and tire fit against your intended chassis. Compatibility with particular Tamiya models and physical fit have not been independently tested by MESHOPIA. Inspect the files in your slicer and choose material and orientation for your intended use. No tested print profile is supplied. The new studio cover uses the actual STL geometry in a bronze finish, from a new angle on a pale stone surface. It preserves all five spokes and the original barrel.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Six-Spoke RC Wheel Rims with 11 mm and 9 mm Source Labels - Four STL Files

Four compact six-spoke RC wheel-rim meshes with cylindrical barrels, raised outer lips and central mounting features. The two deeper variants have recessed central cavities and engraved detail around the outer lip. The two shallower variants show a shaped mounting opening at the center. All four actual meshes were inspected individually. The source folder is named rc car, but its archive contains wheel rims rather than a complete vehicle. Four unchanged STL files are included with English names that distinguish the paired 11 mm and 9 mm source-labeled variants. The deeper filenames also mention a 9 mm tire skin and a thickened outer ring; the shallower filenames mention a thickened outer ring. These are source labels, not tested dimensions, tire compatibility or verified tolerances. The meshes have approximately 21 coordinate units across their outer diameter, with depths near 11 and 9 units; STL does not itself establish physical units. The new cover displays all four supplied variants, with blue deeper rims, sand-colored shallower rims, a changed camera angle and a new workshop background. Original mesh details are retained. No tires, axles, wheel nuts, hubs or complete RC car are included. Check axle shape, center opening, rim offset, tire seating, side-wall clearance and material strength against your vehicle before printing. MESHOPIA has not tested printing, tire fit, mounting or driving performance. The cover renders the actual geometry and shadows in Blender and composites them over a workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar