CR-10 V2/V3 Control Box Mask
A cover to reduce light from the LCD screen after installing Klipper. The author provides a version styled after the Creality Hero action figure and a blank version for modification. The part is a friction fit onto the control box. The author states it will fit on the CR-10 V2 and V3, but notes the original CR-10 may have a different size control box. The piece is 4.93" (125.197mm) wide. Printing instructions: - The model may import in the incorrect orientation; the author states you will need to flip it over so the flat side is towards the build surface. - To achieve a good first layer, the author used a Height Range Modifier to set the 1st layer to 1 perimeter and used Hilbert Curve as the bottom infill pattern to avoid conflict with a carbon fiber texture sheet. The author reports that printing in white may result in a square blue shape due to light passing through the plastic.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar