Meshopia · EnglishEnglish
MESHOPIA

3 modelos etiquetados

#carrocería

Descubre modelos 3D etiquetados como carrocería y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Protector de esquinas traseras para Arrma Senton

Rear corner protector for Arrma Senton

Accessory designed to cover the rear corners of an Arrma Senton body. The source presents it as a protector for those areas; the download corresponds to the printable part and not to a complete body. It does not specify the Senton version, the mounting method, or impact resistance tests. Preparation, compatibility, and printing Compare the part's outline with the corners of your body and check the clearance relative to the wheels and suspension. Before preparing the final print, check the support faces and potential overhangs in the slicer. The material and orientation must be chosen based on the desired fit and flexibility; there are no documented print settings that can be copied as a validated profile.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Caja de herramientas de escala para plataforma de crawler RC

Scale toolbox for RC crawler platform

Miniature toolbox to decorate an RC crawler platform. The author designed it for 1:10 scale and states dimensions of 144 × 54 × 33 mm without lid and 36 mm height with lid. It is a scale accessory, not a box containing tools. Preparation, compatibility, and printing Check the lid and clearances before resizing. The source suggests scaling down to 50% for a 1:18 vehicle, but the exact geometric conversion from 1:10 to 1:18 is approximately 55.6%; the final size should be decided by the available space. Walls and fits also change when scaling. No print profile is documented; check both pieces separately.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Extensor de postes de carrocería para Corally Syncro RC

Body post extender for Corally Syncro RC

Extender for the posts that hold the body of an RC car, specifically designed for Corally Syncro. The author developed it while installing two hard-case LiPo batteries in a Syncro 4: the height of the batteries and cables prevented the rear of the body from being correctly positioned. Potential adaptation to other cars requires measuring the post and the fastening. Preparation, compatibility, and printing Check the post diameter, its usable length, and the body retention system. Ensure that the additional height does not leave cables compressed or create excessive gaps. The source does not specify material or printing parameters. Print a fit test before manufacturing the final set and verify that the body remains secured during the suspension travel.

Technology
Sin probar
material
—
Difficulty
Sin especificar