Meshopia · EnglishEnglish
MESHOPIA

2 modelos etiquetados

#camión rc

Descubre modelos 3D etiquetados como camión rc y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Plataforma de carga para camión RC 6×6 a escala 1:18

Flatbed for 1:18 scale 6x6 RC truck

Flatbed for a 1:18 scale 6x6 RC vehicle. The design allows for equipping or customizing the rear area of the vehicle. The source does not identify a specific chassis nor provides distances between anchor points, permissible load, or a universal fastening system. Preparation, compatibility, and printing Check the length, width, and support points of the file against your chassis. Check the axle travel and the distance to the wheels before deciding on the mounting position. In the slicer, look for an orientation that keeps the loading surface flat and does not deform the supports. No material or print profile is documented; a fit test will allow for adjusting the preparation without assuming compatibility.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte de altavoz Visaton FRS 7 S para Tamiya Scania 770S

Visaton FRS 7 S Speaker Mount for Tamiya Scania 770S

Mount to house a Visaton FRS 7 S speaker in the roof module of a Tamiya Scania 770S. The source describes four mounting points for the speaker, a reinforcement frame, and a side exit for wiring. It suggests a layer of foam or a TPU ring between the speaker and the mount to dampen vibrations. The speaker and these auxiliary elements are not part of the printable piece. Preparation, compatibility, and printing The author recommends PETG or ABS, 30–40% infill, and 100% local reinforcement on the screw turrets. Check dimensions and drill holes against the actual speaker and roof; the approximate measurement of 72 mm cited in the source does not replace that check. Assemble the unit before tightening and keep the cable free from pinches. The acoustic improvements described by the author have not been verified here through testing.

Technology
Sin probar
material
PETG, ABS
Difficulty
Sin especificar