Meshopia · EnglishEnglish
MESHOPIA

1 modelo etiquetado

#cable tie channel

Descubre modelos 3D etiquetados como cable tie channel y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de X-Ray M18T battery holder

X-Ray M18T battery holder

A battery holder designed for the X-Ray M18T to accommodate larger batteries, such as a 2s 1100 mAh LiPo, which otherwise do not fit in the chassis and stand on edge. This part raises the floor to the rim level to provide a flat mounting surface. It includes a channel to push a reusable cable tie through (e.g., "Workzone 250x7.5mm") to act as a battery strap. The author notes that no provisions are made to secure the part itself to the car other than a tight fit; thin double-sided tape or a small amount of silicone is suggested. The base plate features pre-drilled holes, but the author cautions to ensure screws never puncture the battery due to fire risk.

Technology
Sin probar
material
—
Difficulty
Sin especificar