EDF-Style RC Car Body and Chassis Parts - Sixteen STL Files and Original 3MF
An electric-ducted-fan-style RC car body and chassis collection with sixteen original STL files and one original 3MF project. Individual STL meshes and all sixteen mesh resources inside the 3MF were visually reviewed using software-rendered orthographic previews. The geometry includes two numbered body sections, a rear body with circular duct opening, a nose section, front and rear chassis plates, a tubular center brace/coupler, a curved EDF access hatch, an intake cover, a rear fin, steering link and head, a front knuckle, a rear bearing housing, and front/rear wheel-nut shapes. The supplied 3MF contains a grouped parts project with sixteen mesh resources. It overlaps with the separately supplied STL components and includes geometry or tessellation differences in some parts; do not assume it is byte-identical to the STL set or print all files as independent required components. Its project arrangement is not verified assembly guidance. All seventeen original files are preserved unchanged and renamed in English. Review meshes were generated only for inspection and are not additional supplied originals. The source photograph shows an assembled example with an exposed black ducted-fan unit, wheels and wiring. No wheel or tire mesh was found in the reviewed files. Real EDF fan/motor, ESC, battery, servo, receiver, wiring, bearings and metal hardware are not supplied. The folder names the project Jet Powered Car; the available evidence supports an EDF-style miniature layout, not a supplied fuel turbine. The new cover must represent body and chassis geometry without presenting absent running gear or electrical equipment as supplied parts. Actual assembled dimensions, fan compatibility, bearing sizes, steering performance and required copy counts have not been independently verified. No tested fan speed, thrust, vehicle speed, structural load, material choice, print settings or assembly instructions are claimed. MESHOPIA has not physically printed, assembled or operated this collection. The new cover renders the sixteen original STL meshes in Blender, retaining their source-relative positions and rotating the entire arrangement upright. Cobalt and ivory presentation finishes are composited over a locally generated ComfyUI workshop background. The body, closed hatch and rear fin are shown without invented wheels, tires or real EDF equipment. Source-coordinate alignment is an appearance reference, not a validated fit or tested assembly.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar