Ender 2 Pro Satsana (5015 fan, CR-Touch)
An Ender-2 design inspired by Satsana featuring a CR-Touch mount and a 5015 fan duct. The author states it is designed to be printed without needing supports and should allow for full travel of the bed without mods. The author reports CR-Touch to nozzle offsets of {-46, -23.5, 0}. Two versions are provided: one for a stock nozzle and one for a nozzle that is 3mm longer due to the use of a slightly longer heatbreak. Design notes from the author include: smaller gaps on the bottom of the heatsink to prevent unwanted airflow from the heatsink fan (noted as better for PETG/ABS printing); air gaps on the side angled upward to direct heatsink airflow away from the part; a larger area between the heatsink and wires to allow for printing without a brim; and a larger gap between the heatblock and air ducts to prevent melting at higher temperatures.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar