2 modelos etiquetados

#20ft container

Descubre modelos 3D etiquetados como 20ft container y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

Vehículos y transporte12,45 €

MESHOPIA 20ft Tank Container 1:14 | Detailed STL Kit & Hidden Glue Joints

Build a detailed 1:14 scale 20 ft tank container for an RC transport scene, loading yard or display. MESHOPIA Tank20 combines a hollow cylindrical vessel, dished ends, blue end frames and detailed corner fittings in a modular, glue-assembled kit. **Digital download only.** Printed parts, adhesive, truck, chassis, trailer and equipment are not included. This is the updated R02 kit with corrected upper projections and tank braces. The images are Blender renders, not photographs of a physical print. ### SCALE AND SIZE - Scale: **1:14**. - Nominal exterior: **432.714 × 174.143 × 185.071 mm** (L × W × H). - Hollow tank shell with a nominal **2 mm wall**. - Lower corner aperture centre grid: **418.071 × 161.357 mm**. The outer container envelope follows a standard 20 ft reference. The visible tank, frame and pipework proportions are an independent MESHOPIA interpretation informed by reference imagery; this is not a certified factory replica. ### INCLUDED - **58 unique STL files**: 52 production files for 58 assembly components, plus a calibration cube, glue key, clearance coupons and spacing jig. - Editable Blender project with 11 scenes, assembly and detail views, exploded model and print-part inspection. - English assembly instructions, printing notes, BOM, per-part print recipes, generator scripts and digital validation reports. The hidden keys, sleeves and locating features align the split pieces; three jacket bands cover tank-shell seams. There are no visible assembly screws. Dry-fit the parts, keep the frame square while adhesive cures, then fill and finish any remaining seam marks. Follow the included assembly order and check the clearance samples using your printer and adhesive. Digital checks cover mesh closure, dimensions, corner placement, assembly clearances and sampled assembly paths; individual STL slicing evidence is included. **Physical printing, fit, support removal, adhesive strength and handling tests remain pending.** No payload, stacking, lifting or pressure rating is claimed. Decorative pipework and valves do not make this a functional liquid or gas vessel. The lower fitting grid follows the MESHOPIA DryVan20 reference interface. Verify dimensions against your own chassis and twistlocks; compatibility with commercial systems is not established.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporte7,45 €

MESHOPIA 20ft Dry Van Container 1:14 | 22G1 Opening Doors & Hidden Glue Joints

Build a detailed 1:14 scale 20 ft dry van container for an RC yard, loading dock or transport display. The MESHOPIA 22G1 kit combines corrugated walls and roof, recessed rear doors, slim corner posts, forklift pockets and separate door hardware. **Digital files only.** No printed parts, adhesive, metal stock, trailer, truck or twistlocks are included. R04 has documented digital checks but has not yet been physically printed, assembled or tested. Images are renders of the model. ### SCALE AND DIMENSIONS - Scale: **1:14**. - Nominal outside size: **432.714 × 174.143 × 185.071 mm** (L × W × H). - Full-size reference envelope: **6,058 × 2,438 × 2,591 mm**. - Lower corner opening centre spacing: **418.071 × 161.357 mm**. ### FEATURES Two rear doors open on four hinges per leaf. The latch cores include handles and end cams; removable metal pins and retaining collars complete the hardware. Internal locating pegs, bonded overlaps and reinforcement keep assembly joints hidden without screws. Corrugations continue across the side-panel joint, which is placed in a trough and backed internally. Four forklift-pocket mouths are modelled through the lower side panels. Optional EVERGREEN side lettering and MESHOPIA markings are supplied as artwork; the printed walls remain smooth for your own finish. ### FILES AND ASSEMBLY The archive includes **31 unique production STL files for 65 printed components**, plus calibration cubes and a latch-rod forming template. It also contains an editable Blender project, English assembly manual, part keys and hardware BOMs, print documentation, dimensions and decal artwork. Assemble and dry-fit the base, floor, sides, roof and doors in the documented order; supply appropriate pins, sleeves, wire and adhesive yourself. Check nominal dimensions and clearances after printing. Compatibility with commercial chassis, twistlocks or RC systems is not established. Forklift-pocket or latch strength has not been physically tested; no lifting, payload or stacking rating is claimed.

Technology: Sin probar
material: —
Difficulty: Sin especificar