2 modelos etiquetados

#1:8 source scale

Descubre modelos 3D etiquetados como 1:8 source scale y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Split Rear Wing and Braced Supports for 1:8 RC Projects - STL STEP and 3MF

Build a rear-wing accessory for a 1:8 RC project from this collection of original printable and CAD files. The inspected geometry includes two curved wing halves with outer endplates, a narrow curved center strip and a triangular braced support with a mounting plate. The source labels the design 1:8. The car in the supplied reference photograph is not included. Five original files are preserved: one STEP support-leg file, separate STL files for the left wing half, right wing half and center strip, and a 3MF containing the wing components and two support instances. The 3MF places both support instances at the same coordinates; the new cover separates them into two positions and arranges the wing halves around the center strip. This is an illustrative assembly inferred from the geometry and photograph, not a verified fit. The source download retains its original layouts and coordinates. English filenames identify each component and format. Check the center joint, mounting-plate holes, required support spacing and your car body before printing or installing. Fasteners, a car body and tested mounting hardware are not supplied. MESHOPIA has not tested assembly, strength, aerodynamics or vehicle compatibility, and no tested printing profile was supplied. The new teal-and-copper cover uses the actual source geometry rendered in Blender, with a workshop background generated locally in ComfyUI. The compositing preserves the shapes of the supplied parts.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Perforated Display Stand for 1:8 RC Cars - Three STL Parts

Display or support a 1:8 RC car project with this three-part stand. The supplied geometry contains a rectangular top plate with circular perforations and four smaller corner holes, plus two complementary side walls with hexagonal perforations, curved lower openings and flared feet. The source names a 1:8 RC car stand. The vehicle in the original photograph is not included. Three unchanged STL files are renamed in English as the perforated top plate, side wall A and side wall B. The new cover turns the two source wall meshes upright and places the top plate across their narrow upper edges. Their complementary source orientations were checked before creating this illustrative assembly. No printed parts have been resized, and no car, fasteners or extra supports are added. Confirm the top-plate corner holes, wall joints, fastener requirements and clearance beneath your vehicle before printing. The 1:8 label describes the source use case; it does not establish universal compatibility or a verified safe load. MESHOPIA has not tested assembly, load capacity or strength, and no tested printing profile was supplied. The new blue-and-sand cover renders the actual geometry and shadows in Blender, then composites them over an empty workshop background generated locally in ComfyUI.

Technology: Sin probar
material: —
Difficulty: Sin especificar